G6H-2FTL-5VDC资料

元器件交易网www.cecb2b.com

P level: λ60 = 0.1 x 10-6/operation

Note:

Characteristics

Contact resistanceOperate (set) timeRelease (reset) timeBounce timeMax. operating frequencyInsulation resistanceDielectric withstand voltage60 mΩ max.3 ms max. (mean value: approx. 2 ms)2 ms max. (mean value: approx. 1 ms)Operate:0.5 ms max.Release:0.5 ms max.Mechanical:36,000 operations/hrElectrical:1,800 operations/hr (under rated load)1,000 MΩ min. (at 500 VDC)1,000 VAC, 50/60 Hz for 1 min between coil and contacts1,000 VAC, 50/60 Hz for 1 min between contacts of different polarity750 VAC, 50/60 Hz for 1 min between contacts of same polarity1,500 V 10 x 160 µs between contacts of same polarity (conforms to FCC Part 68)Destruction:10 to 55 Hz, 5-mm double amplitudeMalfunction:10 to 55 Hz, 3-mm double amplitudeDestruction:1,000 m/s2 (approx. 100G)Malfunction:500 m/s2 (approx. 50G)Mechanical:100,000,000 operations min. (at 36,000 operations/hr)Electrical:200,000 operations min. (0.1 A at 110 VAC inductive load)Operating:–40_C to 85_C (with no icing)Operating: 35% to 85%Impulse withstand voltageVibration resistanceShock resistanceLife expectancyAmbient temperatureAmbient humidityWeightApprox. 1.5 gNote:The data shown above are initial values. Approved by Standards

UL114, UL478 (File No. E41515)/CSA C22.2 No. 0, No. 14 (File No. LR24825)

ModelG6H–2FDPDTContac tformContac tform3 to 48 VDCContact form1A, 30 VDC0.3A, 100 VDC0.5A, 125 VDCEngineering DataMax. Switching Capacity3Life expectancy (x10 operations)Life Expectancy10,000

7,0005,0003,000

1,000

700 500300 125-VAC resistive load

100

30-VDC resistive load

Switching current (A)AC resistive load

DC resistive load

Switching voltage (V)Switching current (A)DimensionsNote: Orientation marks are as follows:14

9

2.94

Glue Pads

0.3

2.54

1

0.2

5.26.5

0.25

9.56

7.6211.5

2

0.5

2.54

14

元器件交易网www.cecb2b.com

PrecautionsSurface Temperature of PC Board VS. Recommended Soldering Time1. VPS215_C max.)C_ (215Soldering

eru180tatoAirre200

cooling

pmTePreheating

90to100

90 to 120Time (s)40 to 60

3. Other Considerations•Soldering iron heatTemperature at tip: 280_C to 300_CPower: 30 W to 60 WHeating time: 3 s to 5 s•

When soldering with a pulse heater, hot air, or laser, take intoaccount such factors as heat stress, and test the process underactual conditions.Mounting

•Can be mounted in any orientation.•Not suitable for socket mounting.•Do not reverse the coil polarity.

•The diagram below the minimum spacing necessary when

mounting more than one relay on a printed circuit board.Surface Mounting Terminals

2,54 mm min.Terminals

L Terminals (G6H–2F)Characteristics

•Soldering methodsIRS (Infrared radiation furnace)VPS (Vapor phase)•

Removal and replacement is simple.2. IRS

)C220

Soldering

(_to e240ruAirta180cooling

retop200mTePreheating

150

90 to 120

Time (s)20 to 30

Glue pads

Glue Pads

Glue pads are projections from the relay case where adhesive isapplied to temporarily attach the relay to the printed circuit boardbefore soldering. The soldering points are where solder is appliedduring soldering.•

Glue pads are for use with epoxy or UV adhesives. Glue padsare located on the sides to allow UV illumination and adhesivecuring. Two points are provided for stability.

Orientation Marks

These marks are provided to properly position the relays when theyare supplied to the printed circuit board automatically. Two types oforientation marks are provided.•

Mechanical: A U-shaped impression along the top edge is used for alignment.•Optical: A dark mark on the top surface is used for alignment.Cleaning Methods

BrushingFine as long as the detergent has no chemicalDippingor electrical affect on the relay.SprayingVaporHot waterUltrasonicFine as long as the detergent has no chemicalor electrical affect on the relay. The modelnumber of the ultrasound cleaning-type relayends in “-U”.元器件交易网www.cecb2b.com

Tape Packing•Taping methodTape type: TE2416R (or L)Reel type: R53There are 500 relays per reel.Relay orientation:Direction

G6H–2F–TL

Direction

G6H-2F-TR29.5

Dimensions

Cover tape

∅330

Carriertape

emboss tape

1.55 dia.

1.7542

11.524

(10.75)

16

1.5 dia. min.

4

12.1

0.3

0.38±0.05

0.3

14.5±0.1

R0.3 max.

6.9±0.1