Tolerance Analysis WorksheetPrepared By:Analysis Revision:Item being studied:Orig Date:Revised Date:Drawing:Drawing Revision:Unit of Measurement:mminchOtherEquation:Sketch:Result = + 0.51 + 0.50 - 0.52 + 0.53 - 0. + 0.50ension0Tolerance(+)0.04000.07500.05000.02500.03000.0300(–)0.04000.07500.05000.02500.03000.0300DescriptionVector(1 or -1)This sketch area is locked so that the tab key can easily be used toedit the form. To add a sketch to this area, select the button to\"Unlock the Sketch Area\". After adding the sketch, select the buttonagain to \"Lock the Sketch Area\".ItemFactor(1.0 or 0.5)SigmaLevel(no entrytreated as 3)Feature Standard DeviationNormal0.00670.01250.00830.00420.0050.005\"Best\"UniformEstimate0.00910.01150.01710.02170.01140.01440.00570.00720.00680.00870.00680.0087Rec opening height to center lineTrue position of item 1Rec center line to contact2Plug tougue opening height to center line3Plug center line to plug outer dimension4True position of item 4Design Limit(s):LSL =1Dim2.56000.00000.70000.80002.40000.0000USL =Results11-11-110.50.50.50.50.50.5Result Significant digits (round):Average ofRSS & UNormal0.13(RSS)Nominal (Based only on Dimension Column) =0.13Std. Dev. =0.0184Tolerance (+/-) =0.055No minimum or maximum desired resultshave been specified therefore failure rateLower0.075Rangecannot be calculatedUpper0.185Failure Rate (PPM) =0Conclusion:Predicted Mean =Uniform0.03180.0950.0350.225NA0.02510.0750.0550.205NAWorstCaseNA0.1250.0050.255NARequired Actions:Notes: White zones for data input; Grey zones are titles; Yellow zones are results; Computations Hidden (Columns W thru BS)Workbook/Form Revision:19-Jun-12Tyco Electronics Corp. ConfidentialPrinted 2019/6/10Page 1 of 1
