G121I1-L01_Datasheet

Datasheet

Innolux

G121I1-L01

CH-01-032 (Rev.C2) CH-02-031R1.1 (Rev.C4)

The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or consequential, resulting from the use of the information provided herein. Our products are not intended for use in systems in which failures of product could result in personal injury. All trademarks mentioned herein are property of their respective owners. All specifications are subject to change without notice.

PRODUCT SPECIFICATION Doc. Number : □ Tentative Specification □ Preliminary Specification ■ Approval Specification MODEL NO.: G121I1 SUFFIX: L01 Customer: APPROVED BY SIGNATURE Name / Title Note Please return 1 copy for your confirmation with your signature and comments. Approved By yuhsiang.chang (張喻翔/514-10922) 2014-09-26 16:13:44 CST Checked By yuhsiang.chang (張喻翔/514-10922) 2014-09-26 16:13:44 CST Prepared By thurston.lin (林群祥/514-10927) 2014-09-24 11:34:10 CST Version 2.5 1/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION CONTENTS REVISION HISTORY 1. GENERAL DESCRIPTION 1.1 OVERVIEW 1.2 GENERAL SPECIFICATIONS ------------------------------------------------------- ------------------------------------------------------- 3 4 2. MECHANICAL SPECIFICATIONS 3. ABSOLUTE MAXIMUM RATINGS 3.1 ABSOLUTE RATINGS OF ENVIRONMENT 3.2 ELECTRONICAL ABSOLUTE RATINGS 3.2.1 TFT LCD MODULE 3.2.2 BACKLIGHT UNIT ------------------------------------------------------- ------------------------------------------------------- 4 4 4. ELECTRICAL SPECIFICATION 4.1 FUNCTION BLOCK DIAGRAM 4.2 INTERFACE CONNECTIONS 4.3 ELECTRICAL CHARACTERISICS 4.3.1 LCD ELECTRONICS SPECIFICATION 4.3.2 BACKLIGHT UNIT 4.4 LVDS INPUT SIGNAL SPECIFICATIONS 4.4.1 COLOR DATA INPUT ASSIGNMENT 4.5 DISPLAY TIMING SPECIFICATIONS 4.6 POWER ON/OFF SEQUENCE ------------------------------------------------------- 6 5. OPTICAL CHARACTERISTICS 5.1 TEST CONDITIONS ------------------------------------------------------- 16 5.2 OPTICAL SPECIFICATIONS 6. Reliability Test Criteria ------------------------------------------------------- 19 20 7. PACKING 7.1 PACKING SPECIFICATIONS 7.2 PACKING METHOD 7.3 PALLET 7.4 UN-PACKING METHOD ------------------------------------------------------- 8. MODULE LABEL 8.1 MODULE LABEL 8.2 CARTON LABEL ------------------------------------------------------- 23 9. PRECAUTIONS 9.1 ASSEMBLY AND HANDLING PRECAUTIONS 9.2 STORAGE PRECAUTIONS 9.3 OPERATION PRECAUTIONS 9.4 OTHER PRECAUTIONS ------------------------------------------------------- 24 APPENDIX: OUTLINE DIMENSION ------------------------------------------------------- 25 Version 2.5 2/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION REVISION HISTORY Version 2.0 2.1 2.1 2.2 2.3 2.4 2.5 Date Page Description Spec Ver.2.0 was first issued. Modified 3.2.2 Table Modified 4.3.2 and Note (3) Added EN control level and PWM control level spec in 4.3.2 Modified 4.3.2 and Note Added 8bit COLOR DATA INPUT ASSIGNMENT Added UN-Packing Method Modified 5.1 LED Light Bar Input Current 120󰀁240mA Correct to 5.2 Note(6) Definition of White Variation (δW) Drawing Sep.19, 2010 All Nov.18,2010 Nov.18,2010 Feb.15,2011 Aug.10,2011 6 10 10 10 Jun.27, 2013 12 22 Sept.24,2014 16 18 Version 2.5 3/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 1. GENERAL DESCRIPTION 1.1 OVERVIEW G121I1-L01 is a 12.1” TFT Liquid Crystal Display module with LED Backlight unit and 30 pins LVDS interface. This module supports 1280 x 800 Wide-XGA MVA mode and can display 262,144 colors. The LED converter for Backlight is built in control board. 1.2 GENERAL SPECIFICATIONS Item Screen Size Driver Element Pixel Number Pixel Pitch Pixel Arrangement Display Colors Transmissive Mode Surface Treatment Luminance, White Power Consumption Specification Unit 12.1” real diagonal a-si TFT active matrix - 1280 x R.G.B. x 800 pixel 0.204(H) x 0.204 (V) mm RGB vertical stripe - 262K/16.2M color Normally Black - AG type, 3H hard coating - 400 Cd/m2 Total 10.15 W (Max.) @ cell 1.65 W (Max.), BL 8.5 W (Max.) Note - - - - - - - 2. MECHANICAL SPECIFICATIONS Item Horizontal (H) Module Size Vertical (V) Thickness (T) Horizontal Bezel Area Vertical Horizontal Active Area Vertical Weight Min. 277.5 183.5 7.66 2.6 162.7 - - - Typ. 278 184 8.16 265.10 163.2 261.12 163.2 455 Max. 278.5 184.5 8.66 265.6 163.7 - - - Unit mm mm mm mm mm mm mm g Note (1) Note (1) Please refer to the attached drawings for more information of front and back outline dimensions. 3. ABSOLUTE MAXIMUM RATINGS 3.1 ABSOLUTE RATINGS OF ENVIRONMENT Item Storage Temperature Operating Ambient Temperature Note (1) (a) 90 %RH Max. (Ta <= 40 ºC). (b) Wet-bulb temperature should be 39 ºC Max. (c) No condensation. Symbol TST TOP Value Min. -20 -10 Max. 80 70 Unit ºC ºC Note (1) (1), (2) Version 2.5 4/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION Note (2) The temperature of panel surface should be -10 ºC min. and 70 ºC max. Relative Humidity (%RH) -40 -20 100 90 80 60 40 2010 0 Storage Range Operating Range 20 40 60 80 Temperature (ºC) Note (3) 1 time for ± X, ± Y, ± Z. for Condition (25G / 6ms) is half Sine Wave,. Note (4) 5- 9Hz: 3,5mm amplitude 9- 500Hz: 1g- each 10 cycles / axis (X,Y,Z); 1 octave / min. Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. The fixing condition is shown as below: At room Temperature Side Mount Fixing LCD Module Side Mount Fixing Stage Gap=2mm Bracket 3.2 ELECTRICAL ABSOLUTE RATINGS 3.2.1 TFT LCD MODULE Item Power Supply Voltage Logic Input Voltage Symbol VCCS VIN Value Min. -0.3 -0.3 Max. +4.0 Vcc+0.3 Unit V V Note (1) Version 2.5 5/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 3.2.2 BACKLIGHT UNIT Item LED Converter Input voltage LED Converter Input Current Min 10.8 - Value Typ. 12.0 0.7 Max. 15.0 - Unit VDC mADC Note (1), (2) Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Specified values are for LED (Refer to Section 3.2 for further information). Note (2) 4. ELECTRICAL SPECIFICATIONS 4.1 FUNCTION BLOCK DIAGRAM RX0(+/-) RX1(+/-) LVDS INPUT / TIMING CONTROLLER INPUT CONNECTOR (Starconn 093G30-B0001A-G4 ) TFT LCD PANEL SCAN DRIVER RX2(+/-) RX3(+/-) RXCLK(+/-) VCC SEL 6/8 GND VLED DC/DC CONVERTER & REFERENCE VOLTAGE GENERATOR DATA Dimming ENLED LED CONVERTER BACKLIGH 4.2. INTERFACE CONNECTIONS PIN ASSIGNMENT Pin No. Symbol Description Note Version 2.5 6/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 12V 12V 12V 12V ENLED Dimming GND GND VCC VCC GND GND RX0- RX0+ GND RX1- RX1+ GND RX2- RX2+ GND RXCLK- RXCLK+ GND RX3- RX3+ GND SEL6/8 GND GND LED power LED power LED power LED power Enable pin Backlight Adjust Ground Ground Power supply: +3.3V Power supply: +3.3V Ground Ground Negative transmission data of pixel 0 Positive transmission data of pixel 0 Ground Negative transmission data of pixel 1 Positive transmission data of pixel 1 Ground Negative transmission data of pixel 2 Positive transmission data of pixel 2 Ground Negative of clock Positive of clock Ground Negative transmission data of pixel 3 Positive transmission data of pixel 3 Ground LVDS 6/8 bit select function control, Low or NC 󰀁 6 bit Input Mode High 󰀁 8bit Input Mode Ground Ground - - (2) - - - - - - - - - - - - - - - - - - - - - - - - - - Note (1) Connector Part No.: Starconn 093G30-B0001A-G4 Note (2) “Low” stands for 0V. “High” stands for 3.3V Version 2.5 7/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 4.3 ELECTRICAL CHARACTERISTICS 4.3.1 LCD ELETRONICS SPECIFICATION Parameter Power Supply Voltage Permissive Ripple Voltage Rush Current Initial Stage Current Power Supply White Current Black LVDS Differential Input High Threshold LVDS Differential Input Low Threshold LVDS Common Mode Voltage LVDS Differential Input Voltage Terminating Resistor Power per EBL WG Note (2) Measurement Conditions: VR1+12V(High to Low) (Control Signal)FUSE+3.3VSymbol Vcc VRP IRUSH IIS - - VTH(LVDS) VTL(LVDS) VCM |VID| RT PEBL Min. 3.0 - - - 450 350 - -100 1.125 100 - - Value Typ. 3.3 50 - - 500 385 - - - - 100 2.68 Max. 3.6 - 1.5 1.0 550 420 +100 - 1.375 600 - - Unit V mV A A mA mA mV mV V mV Ohm W Note - - (2) (2) (3)a (3)b (5), VCM=1.2V (5) VCM=1.2V (5) (5) (4) Note (1) The assembly should be always operated within above ranges. 2SK1475 Vcc 1uF(LCD Module Input) 2SK1470 0.01uF Version 2.5 8/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION VCC rising time is 470us +3.3V 0.9Vcc 0.1Vcc GND Note (3)The specified power supply current is under the conditions at Vcc = 3.3 V, Ta = 25 ± 2 ºC, fv = 60 Hz, whereas a power dissipation check pattern below is Active Area c. Vertical Stripe Pattern R G B R G B B R G B R G B R R B RG B R G B RG B R G B Active Area Active Area a. White Pattern b. Black Pattern Version 2.5 9/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 4.3.2 BACKLIGHT UNIT Parameter (LED Converter input voltage) (LED light bar input current) LED Lightbar Voltage LED Current Power Consumption Backlight EN on Control Backlight Level off PWM High PWM Level Control PWM Low Level Level PWM Control Frequency PWM Control Duty Ratio LED Life Time Symbol Vi Ii Vf If PL 0 2.0 0 fPWM LBL 190 2 50000 --- 200 - 0.15 20k 100 - V Hz % Hrs (2) (2) (3) --- --- 0.8 5.0 V V Min. 10.8 0.8 - - - 2.0 Value Typ. 12 0.7 35.2 80 8.5 3.3 Max. 15.0 0.6 - - - 5.0 Unit VDC ADC VDC mA W V Note (Duty 100%) (Duty 100%) If= 80 mA/EA Per EA (3) Note (1)LED current is measured by utilizing a high frequency current meter as shown below: Note (2) :At 190 ~1KHz PWM control frequency, duty ratio range is restricted from 2% to 100%. 1K ~20KHz PWM control frequency，minimum duty on-time ≧ 20 us. Note (3) The lifetime of LED is defined as the time when it continues to operate under the conditions at Ta = 25 ±2 ℃ and ILED = 80mADC(LED forward current) until the brightness becomes ≦ 50% of its original value. Operating LED under high temperature environment will reduce life time and lead to color shift. Note (4) PL = Io ×Vo 3 9 Version 2.5 10/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 4.4 LVDS INPUT SIGNAL SPECIFICATIONS 4.4.1 COLOR DATA INPUT ASSIGNMENT The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color. Color R5 Black 0 Red 1 Green 0 Basic Blue 0 Colors Cyan 0 Magenta 1 Yellow 1 White 1 Red(0)/Dark 0 Red(1) 0 0 Gray Red(2) Scale : : Of : : Red Red(61) 1 Red(62) 1 Red(63) 1 Green(0)/Dark 0 Green(1) 0 Gray Green(2) 0 Scale : : Of : : Green Green(61) 0 Green(62) 0 Green(63) 0 Blue(0)/Dark 0 Blue(1) 0 Gray Blue(2) 0 Scale : : Of : : 0 Blue Blue(61) Blue(62) 0 0 Blue(63) R4 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 Red R3 R2 0 0 1 1 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 : : : : 1 1 1 1 1 1 0 0 0 0 0 0 : : : : 0 0 0 0 0 0 0 0 0 0 0 0 : : : : 0 0 0 0 0 0 Data Signal Green G4 G3 G2 G1 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 : : : : : : : : 1 1 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 : : : : : : : : 0 0 0 0 0 0 0 0 0 0 0 0 Blue B3 B2 0 0 0 0 0 0 1 1 1 1 1 1 0 0 1 1 0 0 0 0 0 0 : : : : 0 0 0 0 0 0 0 0 0 0 0 0 : : : : 0 0 0 0 0 0 0 0 0 0 0 0 : : : : 1 1 1 1 1 1 R1 0 1 0 0 0 1 1 1 0 0 1 : : 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 R0 0 1 0 0 0 1 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 G5 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 G0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 B5 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 B4 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 B1 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 1 : : 0 1 1 B0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 Note (1) 0: Low Level Voltage, 1: High Level Voltage Version 2.5 11/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color. Data Signal Color Black Red Green Blue Basic Cyan Colors Magenta Yellow White Red(0) / Dark Red(1) Red(2) : Gray : Scale Red(253) Of Red(2) Red Red(255) 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 Red Green Blue R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 1 0 0 0 1 1 1 0 0 1 : : 0 1 1 0 1 0 0 0 1 1 1 0 1 0 : : 1 0 1 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 Green(0)/ Dark Green(1) Green(2) : Gray : Scale Green(253) Of Green Green(2) Green(255) Blue(0) / Dark Blue(1) Blue(2) : Gray : Scale Blue(253) Of Blue Blue(2) Blue(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 : : 0 1 1 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 : : 0 1 1 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 Note: 0: Low Level Voltage, 1: High Level Voltage Version 2.5 12/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 4.5 DISPLAY TIMING SPECIFICATIONS The input signal timing specifications are shown as the following table and timing diagram. Signal DCLK Item Frequency Vertical Total Time Vertical Addressing Time Horizontal Total Time Horizontal Addressing Time Symbol 1/Tc TV TVD TH THD Min. 67.45 810 800 1360 1280 Typ. 71 823 800 1440 1280 Max. 74.55 1000 800 1600 1280 Unit MHz TH TH Tc Tc Note - - - - - DE Note: Because this module is operated by DE only mode, Hsync and Vsync input signals are ignored. INPUT SIGNAL TIMING DIAGRAM DCLK TC DE THD TDE TVTv DATA Version 2.5 13/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 4.6 POWER ON/OFF SEQUENCE To prevent a latch-up or DC operation of LCD assembly, the power on/off sequence should be as the diagram below. Power ON/OFF sequence 0.9VCCVCC0.1VCCT1T2LVDSVALIDT3T490%10%T70.9VCC0.1VCC0.9ViVi0.1ViT5T690%BL ON/OFFT8T990%PWM DIMMING10%10%0.9Vi0.1Vi Note (1) Please avoid floating state of interface signal at invalid period. Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD VCC to 0 V. Note (3)The Backlight converter power must be turned on after the power supply for the logic and the interface signal is valid. The Backlight converter power must be turned off before the power supply for the logic and the interface signal is invalid. Parameter T1 T2 T3 T4 T5 T6 T7 T8 T9 Value Min 0.5 0 0 500 200 20 5 10 10 Typ --- --- --- --- --- --- --- --- --- Max 10 50 50 --- --- --- 300 --- --- Units ms ms ms ms ms ms ms ms ms Version 2.5 14/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION The Input Data Format Note (1) R/G/B data 7: MSB, R/G/B data 0: LSB Note (2) Please follow PSWG Version 2.5 15/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 5. OPTICAL CHARACTERISTICS 5.1 TEST CONDITIONS Item Ambient Temperature Ambient Humidity Supply Voltage Input Signal LED Light Bar Input Current Symbol Ta Ha VCC IL Value 25±2 50±10 3.3 240 Unit oC %RH V mA According to typical value in \"3. ELECTRICAL CHARACTERISTICS\" The measurement methods of optical characteristics are shown in Section 5.2. The following items should be measured under the test conditions described in Section 5.1 and stable environment shown in Note (5). 5.2 OPTICAL SPECIFICATIONS The relative measurement methods of optical characteristics are shown in 5.2. The following items should be measured under the test conditions described in 5.1 and stable environment shown in Note (5). Item Contrast Ratio Response Time Luminance of White (5P) White Variation Red Color Chromaticity Green Blue White Viewing Angle Horizontal Vertical Symbol Condition CR TR TF LAVE δW Rx Ry Gx Gy Bx By Wx Wy θx+ θx- θY+ θY- θx=0°,θY=0° Viewing Normal Angle Min. 800 - - 300 - Typ. 1000 15 10 400 1.25 0.565 0.351 0.357 0.590 0.155 0.131 0.313 0.329 88 88 88 88 Max. - 20 15 - 1.4 Unit - ms ms cd/2m - - - - - - - - - Deg. Note (2), (5) (3) (4), (5) (5), (6) Typ.- 0.05 Typ.+ 0.05 (1), (5) CR≥10 80 80 80 80 - - - - (1), (5) Version 2.5 16/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION Note (1) Definition of Viewing Angle (θx, θy): Note (2) Definition of Contrast Ratio (CR): The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L255 / L0 L255: Luminance of gray level 255 L 0: Luminance of gray level 0 CR = CR (5) CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6). Note (3) Definition of Response Time (TR, TF): TF TR 100% 90% Gray Level 63 Gray Level 63 Optical Response 10% 0% Gray Level 0 Time 66.6 66.6Version 2.5 17/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION Note (4) Definition of Average Luminance of White (LAVE): Measure the luminance of gray level 63 at 5 points LAVE = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5 L (x) is corresponding to the luminance of the point X at Figure in Note (6). Note (5) Measurement Setup: The LCD module should be stabilized at given temperature for 15 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 15 minutes in a windless room. Note (6) Definition of White Variation (δW): Measure the luminance of gray level 63 at 5 points δW = Vertical Line D/4 Maximum [L (1), L (2), L (3), L (4), L (5)] Minimum [L (1), L (2), L (3), L (4), L (5)] Horizontal Line D D/2 3D/4 W/4 1 5 2 X W W/2 : Test Point X=1 to 5 3W/3 4 Active Area Version 2.5 18/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 6. Reliability Test Criteria Test Item High Temperature Storage Test Low Temperature Storage Test Thermal Shock Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Shock (Non-Operating) Vibration (Non-Operating) Note (1) There should be no condensation on the surface of panel during test. Note (2) Temperature of panel display surface area should be 80 ºC Max Note (3)At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. Test Condition 80ºC, 240 hours -20ºC, 240 hours -20ºC, 0.5hour←→80℃, 0.5hour; 100cycles, 1hour/cycle 70ºC, 240 hours -10ºC, 240 hours 60ºC, 90%RH, 240hours 25G, 6ms, half sine wave, 1 time for ± X, ± Y, ± Z. 5- 9Hz: 3,5mm amplitude 9- 500Hz: 1g- each 10 cycles / axis (X,Y,Z); 1 octave / min (3) (3) Note (1) (2) Version 2.5 19/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 7. PACKING 7.1 PACKING SPECIFICATIONS (1) 20pcs LCD modules / 1 Box (2) Box dimensions: 465 (L) X 362 (W) X 314 (H) mm (3) Weight: approximately 16Kg (20modules per box) 7.2 PACKING METHOD (1) Carton Packing should have no failure in the following reliability test items. Test Item Vibration Dropping Test Test Conditions ISTA STANDARD Random, Frequency Range: 2 – 200 Hz Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y) 1 Angle, 3 Edge, 6 Face, 61 cm Note Non Operation Non Operation Figure. 7-1 Packing method Version 2.5 20/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 7.3 PALLET Sea / Land Transportation (40ft Container)Air Transportation Figure. 7-2 Packing method Version 2.5 21/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 7.4 UN-PACKING METHOD Figure. 7-3 UN-Packing Version 2.5 22/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 8. MODULE LABEL 8.1 MODULE LABEL The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation. (a) Model Name: G121I1-L01 (b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc. (c) CMI barcode definition: Serial ID: XX-XX-X-XX-YMD-L-NNNN Code XX XX X XX YMD L NNNN Meaning CMI internal use Revision CMI internal use CMI internal use Year, month, day Product line # Serial number Description - Cover all the change - - Year: 0~9, 2001=1, 2002=2, 2003=3…2010=0, 2011=1, 2012=2… Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U. Line 1=1, Line 2=2, Line 3=3, … Manufacturing sequence of product 8.2 CARTON LABEL (a) P/N: Internal control (b) Model Name: G121I1-L01 (c) Production year and month: shown at left down corner (d) Production location: Made In XXXX. XXXX stands for production location. Version 2.5 23/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited. PRODUCT SPECIFICATION 9. PRECAUTIONS 9.1 ASSEMBLY AND HANDLING PRECAUTIONS (1) The module should be assembled into the system firmly by using every mounting hole. Be careful not to twist or bend the module. (2) While assembling or installing modules, it can only be in the clean area. The dust and oil may cause electrical short or damage the polarizer. (3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection and assembly process. (4) Do not press or scratch the surface harder than a HB pencil lead on the panel because the polarizer is very soft and easily scratched. (5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do not use Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanently damage the polarizer due to chemical reaction. (6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left on panel for a long time. (7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap. (8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC. (9) Do not disassemble the module. (10) Do not pull or fold the lamp wire. (11) Pins of I/F connector should not be touched directly with bare hands. 9.2 STORAGE PRECAUTIONS (1) High temperature or humidity may reduce the performance of module. Please store LCD module within the specified storage conditions. (2) It is dangerous that moisture come into or contacted the LCD module, because the moisture may damage LCD module when it is operating. (3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, the response time will become slowly, and the starting voltage of lamp will be higher than the room temperature. 8.3 OPERATION PRECAUTIONS (1) Do not pull the I/F connector in or out while the module is operating. (2) Always follow the correct power on/off sequence when LCD module is connecting and operating. This can prevent the CMOS LSI chips from damage during latch-up. (3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while assembling with converter. Do not disassemble the module or insert anything into the Backlight unit. 8.4 OTHER PRECAUTIONS (1) When fixed patterns are displayed for a long time, remnant image is likely to occur. Version 2.5 24/26 The copyright belongs to InnoLux. Any unauthorized use is prohibited.

Our company network supports you worldwide with offices in Germany, Great Britain, Italy, Turkey and the USA. For more information please contact:

Distec GmbH Augsburger Str. 2b 82110 Germering Germany Phone: Fax: E-Mail:

+49 (0) / 43 63-0 +49 (0) / 43 63-131 info@datadisplay-group.de

Display Technology Ltd. 5 The Oaks Business Village Revenge Road, Lordswood Chatham, Kent, ME5 8LF United Kingdom Phone: Fax: E-Mail:

+44 (0)1634 / 67 27 55 +44 (0)1634 / 67 27 info@datadisplay-group.co.uk

Internet: www.datadisplay-group.de Internet: www.datadisplay-group.co.uk

Apollo Display Technologies, Corp. 87 Raynor Avenue, Unit 1Ronkonkoma, NY 11779

United States of America Phone: Fax: E-Mail:

+1 631 / 580-43 60 +1 631 / 580-43 70

info@datadisplay-group.com

Internet: www.datadisplay-group.com

Sales Partner:

REM Italy s.a.s. di Michieletto Flavio & C. Via Obbia Bassa, 10 I-35010 Trebaseleghe (PD) Italy

Phone: +39 335 521 37 E-Mail: info@remitaly.com Internet:www.remitaly.com

Sales Partner:

DATA DISPLAY BİLİŞİM TEKNOLOJİLERİ İÇ VE DIŞ TİCARET LİMİTED ŞİRKETİ Barbaros Mh Ak Zamabak Sk A Blok D:143 Ataşehir/İstanbul Turkey

Phone: +90 (0)216 / 688 04 68 Fax:

+90 (0)216 / 688 04 69

E-Mail: info@data-display.com.tr Internet:www.data-display.com.tr